SILT FENCE PLOW 3PT HITCH 36"- 48" FABRIC WITH OR WITHOUT WIRE FOR TRACTOR

Swing Dampening Brake

This simple design allows you to adjust the amount of tension on the chute when it is out of the ground. It prevents slapping of the chute when transporting the machine. Simply tighten or loosen the bolts to allow more or less tension.

Forklift/Hoist Slots

Easy moving. 6”x 4” x 3/8” Tube Steel Main Frame for the strongest built plow in the industry.

Simple Rotary Offset Design

Allows you to quickly offset to either side of center to pull, and to swing the machine over either side of center to push the silt fence plow forward. By aligning two pins, the machine's offset position can be changed while it is in the ground.

90° Rear Pivot Swing

The rear pivot can swing 90° either side of center, and provides the tightest turning radius available. Massive 2” x 8” pivot pins ensure years of dependable service.

Fabric Tension Spring and 16” Diameter Fabric Plates

Simple, easy-to-adjust fabric tension spring allows for quick adjustment. 16” Diameter fabric plates prevent the fabric from telescoping over the plates during installation.

Spring Loader Coulter

Comes with hardened steel blade; cuts through tree roots and vegetation.

1" Moleboard Knife

This is standard equipment. Stainless steel parts in key wear areas, and a specially designed fabric chute installs fabric in a tight consistent snag free manner.

Replaceable Hard Surface Plow Point

Designed to disrupt the soil upward for easier pulling and proper silt fence installation.

Cutting Coulter and Replaceable 2" wide Self-Sharpening Cutting Tooth

The cutting tooth can be bought at any dealer who sells replacement cutting teeth for excavators or skid loaders; it is not proprietary to "The Silt Fence Plow". The coulter cuts through tree roots, grass and other material that can hang up around the moleboard knife.

Swing Dampening Brake

This simple design allows you to adjust the amount of tension on the chute when it is out of the ground. It prevents slapping of the chute when transporting the machine. Simply tighten or loosen the bolts to allow more or less tension.

Forklift/Hoist Slots

Easy moving. 6”x 4” x 3/8” Tube Steel Main Frame for the strongest built plow in the industry.

Simple Rotary Offset Design

Allows you to quickly offset to either side of center to pull, and to swing the machine over either side of center to push the silt fence plow forward. By aligning two pins, the machine's offset position can be changed while it is in the ground.

90° Rear Pivot Swing

The rear pivot can swing 90° either side of center, and provides the tightest turning radius available. Massive 2” x 8” pivot pins ensure years of dependable service.

Fabric Tension Spring and 16” Diameter Fabric Plates

Simple, easy-to-adjust fabric tension spring allows for quick adjustment. 16” Diameter fabric plates prevent the fabric from telescoping over the plates during installation.

Spring Loader Coulter

Comes with hardened steel blade; cuts through tree roots and vegetation.

1" Moleboard Knife

This is standard equipment. Stainless steel parts in key wear areas, and a specially designed fabric chute installs fabric in a tight consistent snag free manner.

Replaceable Hard Surface Plow Point

Designed to disrupt the soil upward for easier pulling and proper silt fence installation.

Cutting Coulter and Replaceable 2" wide Self-Sharpening Cutting Tooth

The cutting tooth can be bought at any dealer who sells replacement cutting teeth for excavators or skid loaders; it is not proprietary to "The Silt Fence Plow". The coulter cuts through tree roots, grass and other material that can hang up around the moleboard knife.

Swing Dampening Brake

This simple design allows you to adjust the amount of tension on the chute when it is out of the ground. It prevents slapping of the chute when transporting the machine. Simply tighten or loosen the bolts to allow more or less tension.

Forklift/Hoist Slots

Easy moving. 6”x 4” x 3/8” Tube Steel Main Frame for the strongest built plow in the industry.

Simple Rotary Offset Design

Allows you to quickly offset to either side of center to pull, and to swing the machine over either side of center to push the silt fence plow forward. By aligning two pins, the machine's offset position can be changed while it is in the ground.

90° Rear Pivot Swing

The rear pivot can swing 90° either side of center, and provides the tightest turning radius available. Massive 2” x 8” pivot pins ensure years of dependable service.

Fabric Tension Spring and 16” Diameter Fabric Plates

Simple, easy-to-adjust fabric tension spring allows for quick adjustment. 16” Diameter fabric plates prevent the fabric from telescoping over the plates during installation.

Spring Loader Coulter

Comes with hardened steel blade; cuts through tree roots and vegetation.

1" Moleboard Knife

This is standard equipment. Stainless steel parts in key wear areas, and a specially designed fabric chute installs fabric in a tight consistent snag free manner.

Replaceable Hard Surface Plow Point

Designed to disrupt the soil upward for easier pulling and proper silt fence installation.

Cutting Coulter and Replaceable 2" wide Self-Sharpening Cutting Tooth

The cutting tooth can be bought at any dealer who sells replacement cutting teeth for excavators or skid loaders; it is not proprietary to "The Silt Fence Plow". The coulter cuts through tree roots, grass and other material that can hang up around the moleboard knife.